RNI-0002 Double-Drawer Nightstand with Concealed Compartment

RNI-0002 Double-Drawer Nightstand with Concealed Compartment

€399,00
Skip to product information
RNI-0002 Double-Drawer Nightstand with Concealed Compartment

RNI-0002 Double-Drawer Nightstand with Concealed Compartment

€399,00
Taxes included.
Inquire

The things worth keeping out of reach are rarely bulky. A passport, a spare set of keys, documents, medication, a small amount of cash. They do not need a safe. They need somewhere that is not the first place anyone looks, which in a bedroom is the drawer of the nightstand.

RNI-0002 puts that space above the drawers rather than in them. The top of the cabinet lifts, and underneath it is a compartment running the full width of the carcass. Closed, the top is a top: one continuous surface with no handle, no keyhole and no seam that reads differently from any other line on the piece. It opens only to a magnetic key or an RFID card, specified when you order.

Below it, two drawers on full-extension soft-close runners. Full extension means the back of the drawer clears the carcass — you can reach what is at the back without pulling the drawer off its runners, which is not true of the partial-extension hardware used at this price.

Made to order in Zagreb. Specify the decor and the lock type when you order; custom dimensions are quoted from the same drawing.

Specification
Dimensions (W×D×H): 446 mm x 317 mm x 498 mm
Weight: 22 kg
Material: Melamine-faced chipboard (MDP)
Use environment: Indoor only
Country of origin: Croatia
Material & durability
Melamine-faced chipboard

The panel is standard melamine-faced chipboard — the same board used across European cabinet manufacturing, in whatever decor, colour and texture the board maker offers. It is stable, it is dimensionally consistent, and it takes hardware reliably. It is not the interesting part of this piece and it is not sold as though it were.

All visible edges are edgebanded. That is the difference between furniture and flat-pack: a raw chipboard edge absorbs moisture, chips at the corner and shows the core. An edgebanded one does none of those things.

The hardware

This is where the money goes. Concealed hinges and soft-close runners throughout, so nothing slams and nothing has to be caught on the way down. One shelf uses a gas strut: the front lifts under its own control, holds wherever you leave it, and closes without dropping.

The compartment closes flush. From the front there is no handle, no pull, no visible catch and no gap that reads differently from any other line on the piece.

Choice of lock

Every piece is supplied with either a magnetic lock or an RFID lock, specified when you order.

The magnetic lock opens with a key magnet held against the front. There is nothing to power, nothing to fail and no electronics — the magnet lives on a keyring or on the back of a nearby object.

The RFID lock opens with a card or fob presented to the front. It suits anyone who would rather not carry a magnet, and allows more than one person to have access.

Both are concealed behind the front. Neither is visible from outside the piece.
Care & cleaning
Routine cleaning

Wipe with a soft cloth, warm water and a mild detergent, then dry. Melamine is a closed surface — nothing soaks in, and it does not need polish, oil or wax. Wipe spills rather than leaving them to dry.

Do not use

Abrasive pads, scouring powders, solvents or bleach. These dull the melamine and the change is permanent. Steam cleaners and saturated cloths force moisture into the joints, which is the one thing chipboard does not tolerate.

Edges and joints

Edgebanded edges are sealed, but standing water at a joint will eventually find its way in. Dry any water that collects along a front or a top edge rather than leaving it.

Hardware

Soft-close runners and hinges are set at the factory and need no adjustment. If a front stops closing flush, the hinge has usually shifted rather than failed — the adjustment screws are visible when the front is open. The gas strut is a sealed unit and cannot be serviced; if it stops holding, it is replaced.

Locks

The magnetic lock has no moving electronics and needs nothing. Keep the key magnet away from cards, drives and anything else magnetically sensitive. The RFID lock is battery-powered — replace the battery when the indicator changes, and keep a spare card somewhere other than inside the compartment.
Ordering & lead time
Lead time: 14
Minimum order: 1
Custom sizes and colours: Decor, colour and finish are specified when you order, from the board manufacturer's current range. Lock type — magnetic or RFID — is also specified at order.
Delivery & pickup
Collection in Zagreb
By prior arrangement. We confirm by email when the piece is ready to collect. No charge.
Delivery
Shipped by courier within Croatia and across the EU. Cost and transit time are confirmed per order — contact us with your address before ordering.
On arrival
Check the carton before signing. If there is visible damage to the packaging, note it on the carrier's delivery document at the point of signature. Photograph any damage and contact us within 48 hours.
Packaging
Packed in a single carton.
FAQ
  1. How does the compartment open?
    It lifts up. Present the magnetic key or the RFID card to the front of the plinth and the lid releases.
  2. Can someone find it?
    Someone who knows to look for it, yes — this is concealment, not a safe. There is no handle, no keyhole and no visible seam that differs from the other lines on the piece, so it is not apparent to a visitor, a cleaner or an opportunistic search. It is not rated to resist a determined attempt with tools, and nothing at this price is.
  3. What actually fits in it?
    Documents, a passport, keys, cards, medication, a small amount of cash. The compartment runs the width of the cabinet and is shallow — it is sized for flat items rather than for volume. Full interior dimensions are in the specification above.
  4. Magnetic or RFID — which should I choose?
    The magnetic lock has no electronics and no battery. Nothing to charge, nothing to fail, and the key is a magnet that lives on a keyring. The RFID lock opens with a card or fob, suits more than one person having access, and is battery-powered — you replace the battery, and you keep a spare card somewhere other than inside the compartment. Neither costs more than the other.
  5. What happens if the lock fails or I lose the key?
    The magnetic lock has no failure mode short of physical damage; a replacement key magnet is inexpensive and we can send one. If an RFID lock loses power, the compartment stays closed until the battery is replaced. Contact us before attempting to force it — the lid and the mechanism are both replaceable, but forcing damages the front.
  6. Can I choose the colour?
    Yes. Any decor, colour or texture the board manufacturer offers. Send the decor reference when you order, or tell us what you are matching and we will send options.
  7. Does it come assembled?
    Yes
  8. Can I get it in another size?
    Yes. The cut list is generated from the same drawing, so height, width and depth are parameters rather than a redesign. Useful if you are matching an existing bed or a fitted run. Quoted on request.

You may also like